Rhode Island Motorcycle practice
Rhode Island Motorcycle: Road Signs practice test
Learn the shapes, colors, and meanings of regulatory, warning, and guide signs — from stop and yield to construction and school-zone signs.
Content reviewed against official driver handbooks · August 12, 2026
15 questions · pass with 12 correct. You get instant feedback and an explanation after every answer.
Study questions with answers
12 sample Road Signs questions with the correct answer, a short explanation, and the official handbook reference. Read through them, then take the quiz above.
Show all 12 questions with answers
1. A red arrow is lit for your turn. What does Rhode Island's driver manual say can replace it when it goes out?
Correct answer: A flashing yellow arrow, a green arrow or a solid green light
While a red arrow shows, you must stop and may not go in its direction. Once it goes out, the next display will be a green arrow, a solid green light or a flashing yellow arrow.
Source: Rhode Island Driver's Manual — Traffic Lights/Signals
2. On a two-lane road with a solid line next to a broken line, what may a driver or rider with the broken line on their side do?
Correct answer: Pass with care
Those with the solid line on their side should not pass or cross it except in the listed emergencies and legal turns. Those with the broken line on their side may pass another vehicle with care.
Source: Rhode Island Driver's Manual — Roadway Markings
3. Which colors does Rhode Island's driver manual give for high-visibility construction signs?
Correct answer: Fluorescent yellow-green, orange or pink
The manual describes construction signs in fluorescent yellow-green, orange or pink, shaped as diamonds or rectangles and posted before, within and after work zones.
Source: Rhode Island Driver's Manual — Construction and Work Zone Safety Requirements
4. What is a HAWK signal, as Rhode Island's driver manual describes it?
Correct answer: A High-Intensity Activated Crosswalk signal that helps pedestrians cross
HAWK stands for High-Intensity Activated Crosswalk, a signal used to let pedestrians cross a street safely.
Source: Rhode Island Driver's Manual — Traffic Lights/Signals
5. In Rhode Island, what must you do at a flashing red traffic light?
Correct answer: Stop fully and yield to vehicles on your right and left, as at a stop sign
The manual says to come to a full stop at a flashing red signal, yield the right-of-way to vehicles on your right and left, and treat it as a stop sign.
Source: Rhode Island Driver's Manual — Traffic Lights/Signals
6. What does a shared-lane marking painted in the center of a travel lane tell road users?
Correct answer: A bicyclist may use the full lane
Rhode Island's driver manual says the shared-lane marking shows that a bicyclist may use the entire lane and alerts drivers to where bicyclists are likely to ride.
Source: Rhode Island Driver's Manual — Roadway Markings
7. A flashing yellow arrow is showing for your left turn. What must you do before turning?
Correct answer: Yield to oncoming traffic and pedestrians, since oncoming traffic has a steady green
Rhode Island's driver manual says a flashing yellow arrow lets you turn in the arrow's direction once you have yielded to pedestrians and to oncoming traffic, which has a steady green.
Source: Rhode Island Driver's Manual — Traffic Lights/Signals
8. The railroad tracks at a crossing look abandoned. What does Rhode Island's driver manual say to assume?
Correct answer: A train could still use them
The manual says never to assume a train can't be present; treat tracks as active even when they look abandoned. A train may need a mile and a half to stop after braking.
Source: Rhode Island Driver's Manual — Vehicle Stalls on Railroad Tracks
9. In Rhode Island, what do yellow pavement lines separate?
Correct answer: Traffic moving in opposite directions
In Rhode Island's markings, yellow divides opposing directions of travel and white divides lanes moving the same way.
Source: Rhode Island Driver's Manual — Roadway Markings
10. Before a roundabout, what warning sign does Rhode Island's driver manual tell you to watch for?
Correct answer: A yellow diamond showing arrows in a circle
The manual describes a yellow, diamond-shaped warning sign with arrows forming a circle and two or more arrows pointing outward to represent the exits.
Source: Rhode Island Driver's Manual — Rotary/Roundabout Diagram
11. While you ride through a Rhode Island work zone, what does the driver manual say about changing lanes?
Correct answer: Don't change lanes within the work zone
The manual says to follow the directions of police officers and flaggers and not to change lanes inside the work zone. Merge early, at first notice, when it is safe.
Source: Rhode Island Driver's Manual — Construction and Work Zone Safety Requirements
12. Rhode Island's driver manual uses the term "stale green light." What does it mean?
Correct answer: A signal that turned green some time ago
In the manual's terms, a stale green has been showing green for some time, while a fresh green has only just changed.
Source: Rhode Island Driver's Manual — Traffic Lights/Signals
More Motorcycle topics
Practice Road Signs in another state
Every Rhode Island question is written from the official Rhode Island driver handbook and checked against its current edition. DMV Test Free is a free, independent study resource — not affiliated with any DMV or government agency. About DMV Test Free